×

Welcome to Knowledge Base!

KB at your finger tips

This is one stop global knowledge base where you can learn about all the products, solutions and support features.

Categories
All
ERP-SAP
SAP NetWeaver Application Server for ABAP (higher than 7.40)

SAP NetWeaver Application Server for ABAP (higher than 7.40)

Available Monitoring Content

The following monitoring content is available for SAP NetWeaver Application Server for ABAP (higher than 7.40):

Category Type Description
IDoc Messages IDocs sent or received by the SAP S/4HANA system
Web Service Messages Messages Messages sent or received via Web Services and Web Service Proxies
ABAP Runtime Exceptions ABAP runtime errors (available with ST-PI 7.40 SP16)
ABAP Update Exceptions ABAP update errors (available with ST-PI 7.40 SP16)
ABAP Gateway Errors Exceptions Exceptions in the ABAP Gateway (available with ST-PI 7.40 SP16)
ABAP Aborted Job Exceptions ABAP aborted jobs (available with ST-PI 7.40 SP16)
ABAP System Log Exceptions ABAP system log errors (available with ST-PI 7.40 SP16)
ABAP Web Service Consumer Exceptions Web service errors for outgoing web service calls (available with ST-PI 7.40 SP16)
ABAP Web Service Provider Exceptions Web service errors for incoming web service calls (available with ST-PI 7.40 SP16)

Connect SAP ABAP On-Premise System

To perform the necessary setup steps in the SAP NetWeaver Application Server for ABAP system, please refer to:

  • SAP NetWeaver Application Server for ABAP (higher than 7.40)

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP NetWeaver Application Server for ABAP.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Message(IDOC) Detected(Single): The event is created for each failed IDoc.
  • Erroneous Messages(IDOC) Detected(Grouped): The event is created if one or more IDocs failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Message Type
  • Status
  • Status Group
  • Basic Type
  • Direction
  • Message Function
  • Message Type
  • Message Variant
  • Receiver Address
  • Receiver Partner Function
  • Receiver Partner Number
  • Receiver Partner Type
  • Receiver Port
  • Sender Address
  • Sender Partner Function
  • Sender Partner Number
  • Sender Partner Type
  • Sender Port
  • Status
  • Status Group
  • Status Text

Setup Collection for Additional Payload Attributes

You can collect payload data from IDocs. This data will be available in the message details on the tab "Message Data".

  1. To find the segment field name:
    1. Log on to the managed ABAP backend system
    2. Go to transaction WE05
    3. Enter the search parameters to find one IDoc message for the IDocs you are interested in
    4. Double-click on the IDoc to open it
    5. Expand 'Data Records'
    6. Select the segment that you are interested in
    7. You find the segment fields on the screen "Content of Selected Segment"
  2. To set up the data collection of payload attributes click on the > button at the end of the line for the category IDoc
  3. In the area "Collect Additional Attributes"
    1. Click the "Add" button to add the payload attribute
    2. Enter the filter value:
      1. Message Type
      2. Segment Name
      3. Field Name
    3. Click "OK"
  4. Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

Prerequisites

  • The Minimum System Requirements to monitor SXMB_MONI for Web Services is SAP BASIS 7.02 SP08
Available Events
  • Erroneous Message(WS) Detected(Single): The event is created for each failed web service message.
  • Erroneous Messages(WS) Detected(Grouped): The event is created if one or more web service messages failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group
  • Adapter Type
  • Direction
  • Message State
  • Processing Status Group
  • Processing Status Group Text
  • Receiver Interface Name
  • Receiver Interface Namespace
  • Receiver Interface Operation
  • Receiver Party
  • Sender Interface Name
  • Sender Interface Namespace
  • Sender Interface Operation
  • Sender Party
  • Status
  • Status Group
  • Status Text

Setup Collection for Additional Payload Attributes

You can collect payload data from Web Service messages. This data will be available in the message details on the tab "Message Data".

  1. Find the payload attribute name:
    1. Log on to the managed ABAP backend system
    2. Go to transaction SRT_MONI
    3. Enter the search parameters to find one web service message for the web service you are interested in
    4. Double-click on the web service message to open it
    5. Select 'Message Body'
    6. Click the button 'Original XML' to open the formatted XML message
    7. Find the attribute you are interested in
    8. Note down the XML tag name
  2. To set up the data collection of payload attributes click on the > button at the end of the line for the category "Web Service Messages"
  3. In the area "Collect Additional Attributes"
    1. Click the "Add" button to add the payload attribute
    2. Enter the filter value:
      1. Attribute: The XML tag name on the attribute
    3. Click "OK"
  4. Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

Available Events
  • Erroneous ABAP Aborted Job: The event is created for aborted ABAP jobs.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Job Name
  • User

Available Events
  • Erroneous ABAP Gateway Errors: The event is created for ABAP gateway exceptions.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Service Name
  • User
  • Host
  • Message
  • Location
  • Message Id

Available Events
  • Erroneous ABAP Runtime: The event is created for ABAP runtime errors.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Runtime Error~Exception
  • Program
  • User
  • Message

Available Events
  • Erroneous ABAP System Log: The event is created for exceptions in the ABAP System Log.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Message Id
  • Program
  • User
  • Status

Available Events
  • Erroneous ABAP Update: The event is created for ABAP Update errors.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • User
  • Transaction

Available Events
  • Erroneous ABAP Web Service Consumer: The event is created for errors in the web service log for ABAP Web Service Consumers.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Message
  • Proxy Name
  • User

Available Events
  • Erroneous ABAP Web Service Provider: The event is created for errors in the web service log for ABAP Web Service Providers.

Available Filters

Filters for Data Collection Filters for Events (planned)

Coming soon.

  • Message
  • WS Name (Proxy)
  • User
SAP Batch Release Hub for Life Sciences

SAP Batch Release Hub for Life Sciences

Available Monitoring Content

The following monitoring content is for SAP Batch Release Hub for Life Sciences

Category Type Description
Replication Messages Messages Monitors replication messages in SAP Batch Release Hub for Life Sciences

Connect SAP Batch Release Hub for Life Sciences

To perform the necessary setup steps in the SAP Batch Release Hub for Life Sciences, please refer to:

  • Setup SAP Batch Release Hub for Life Sciences

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Batch Release Hub for Life Sciences.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Replication Messages Detected (Single): The event is created for each failed message in the managed service.
  • Erroneous Replication Messages Detected (Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group
  • Direction
  • Object Entity Id
  • Object Type
  • Source Root Id
  • Status
  • Status Details
  • Status Group
  • X-Component Name
Read article
Integration Hub for Life Sciences

Integration Hub for Life Sciences

Available Monitoring Content

The following monitoring content is for Integration Hub for Life Sciences

Category Type Description
Replication Messages Messages Monitors replication messages in Integration Hub for Life Sciences

Connect Integration Hub for Life Sciences

To perform the necessary setup steps in the Integration Hub for Life Sciences, please refer to:

  • Setup Integration Hub for Life Sciences

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for Integration Hub for Life Sciences.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Replication Messages Detected (Single): The event is created for each failed message in the managed service.
  • Erroneous Replication Messages Detected (Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group
  • Direction
  • Object Entity Id
  • Object Type
  • Source Root Id
  • Status
  • Status Details
  • Status Group
  • X-Component Name
Read article
SAP Data Intelligence

SAP Data Intelligence

Available Monitoring Content

The following monitoring content is available for SAP Data Intelligence.

Category Type Description
SAP Data Intelligence Messages Messages Messages send to and from SAP Data Intelligence

Connect SAP Data Intelligence

To perform the necessary setup steps in the SAP Data Intelligence, please refer to:

  • Setup SAP Data Intelligence

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Data Intelligence.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Data Intelligence Service Messages Detected (Single): The event is created for each failed message in the managed service.
  • Erroneous Data Intelligence Service Messages Detected (Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group
  • Connection
  • Direction
  • Status
  • Status Group
  • Status Text
Read article
SAP Business ByDesign

SAP Business ByDesign

This portal page describes the monitoring setup for SAP Business ByDesign tenants.

Available Monitoring Content

The following monitoring content is available for SAP Business ByDesign:

Category Type Description
SAP Business ByDesign Messages Messages Monitors messages sent from and to SAP Business ByDesign

Connect SAP Business ByDesign

To perform the necessary setup steps in the SAP Business ByDesign, please refer to:

  • Setup SAP Business ByDesign

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Business ByDesign.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Business ByDesign Message Detected(Single): The event is created for each failed message in the managed service.
  • Erroneous Business ByDesign Messages Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group

Which filter values make sense for SAP Business ByDesign messages depends on the message direction.

INCOMING Messages

  • Message Direction: INCOMING
  • Sender Party
  • Inbound Service Interface Name
  • Creation UserID
  • Execution UserID
  • Status
  • Status Text
  • Status Group

OUTGOING Messages

  • Message Direction: OUTGOING
  • Receiver Party
  • Outbound Service Interface Name
  • Creation UserID
  • Execution UserID
  • Status
  • Status Text
  • Status Group
Read article
SAP Omnichannel Promotion Pricing

SAP Omnichannel Promotion Pricing

Available Monitoring Content

The following monitoring content is available for SAP Omnichannel Promotion Pricing

Category Type Description
Upload Messages Messages Monitors uploaded messages in SAP Omnichannel Promotion Pricing

Connect SAP Omnichannel Promotion Pricing

To perform the necessary setup steps in the SAP Omnichannel Promotion Pricing, please refer to:

  • Setup SAP Omnichannel Promotion Pricing

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Omnichannel Promotion Pricing.

Please note:

  • If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
  • If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

Available Events
  • Erroneous Upload Message Detected (Single): The event is created for each failed message in the managed service.
  • Erroneous Upload Messages Detected (Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection Filters for Events
  • Status
  • Status Group
  • Direction
  • Error Code
  • Message Level
  • Object Name
  • Object Type
  • Status
  • Status Details
  • Status Group
Read article

Still Thinking?
Give us a try!

We embrace agility in everything we do.
Our onboarding process is both simple and meaningful.
We can't wait to welcome you on AiDOOS!